Lowcountry humidity slows drying, so wet walls and floors need monitored equipment instead of open windows. The Hanahan crew sets dehumidifiers and air movers and logs readings until everything is dry.
(888) 532-8921Wet walls or floors? Call now
Close the affected rooms so equipment can control the air.
Let dehumidifiers and air movers run as set, even if the room feels dry.
Take rugs, books and fabric out of damp rooms to dry elsewhere.
Tell the crew about musty smells, which point to damp walls.
Structural Drying and Dehumidification: the trade facts
Removing water is only half the job. Walls, subfloors and framing hold moisture that a vacuum cannot reach, and Lowcountry humidity makes the air slow to take it up. Structural drying uses measured equipment to pull that moisture out of every wet material, rather than leaving windows open and hoping for the best.
A single wet area costs $1,000 to $2,800. Several rooms with wet walls run $2,800 to $5,800, and dense materials such as hardwood or slab run $5,500 to $9,000. Equipment days and material density set the total.
$1,000 to $2,800
$2,800 to $5,800
$5,500 to $9,000
Ranges are typical figures, not a quote. The category of water, the square footage, the material class and how fast drying started move the number most. The water damage cost calculator gives a closer range.
The tech who does the walkthrough finds the source and maps the moisture before equipment goes down, and the drying team keeps it running until the readings say dry.
Meters, a thermal camera and air readings set the baseline for every room.
Equipment is sized and placed to match the wet materials and room.
The crew returns, records readings and moves equipment as surfaces dry.
Equipment comes out once every material matches the dry goal.
A surface can feel dry while the material behind it is not. The crew takes moisture content readings in wood and drywall, and temperature and humidity readings in the air, then writes them in a log. Equipment comes out only when readings match a dry reference.
Outside air in the Lowcountry is often damp, so a window can bring in as much moisture as it lets out. A closed room with a dehumidifier controls the air, and that is what lets walls and floors dry. The logs also give an insurer a record of the work.
Drying usually follows emergency water extraction or a burst pipe loss, and the Hanahan hub lists all services.
Structural drying covers ZIP 29410, including Tanner Plantation, Tanner Hall, Ibis Glade and Sweetgrass, plus Bowen Village, Charleston Oaks, Mossy Creek and the Brookside Drive area.
The same service nearby: structural drying and dehumidification in Goose Creek, North Charleston, Charleston.
Several days for most jobs, and longer for dense materials. The crew checks the readings at each visit and removes equipment when the goal is met.
Air movers and dehumidifiers move large amounts of air and water. The noise is a sign the equipment is working through the wet materials.
Household fans move air without removing moisture from it. Dehumidifiers pull the water out of the air, which is what dries walls and floors.
A record of temperature, humidity and moisture readings that shows how the drying is progressing. It also supports an insurance claim.
Equipment runs around the clock and adds to the bill. The crew sets only what the loss needs.
Often yes, if the cavity is accessible through small openings or the base. Wet insulation and soaked board still have to come out.
Walls still wet after the cleanup? Dispatch runs 24/7.
Moisture left inside framing keeps causing damage after the water is gone. The drying crew places equipment, logs readings and stops only at dry.