A water loss can stop a business in Hanahan, from a shop at Tanner Station or Bowen Square to a warehouse unit. The commercial crew extracts, contains and dries in phases so operations can restart.
(888) 532-8921Business flooded? Call for dispatch
Close the valve or main feeding the leak, if safe to reach.
Move inventory, files and electronics to dry shelves.
Tell the property manager and tenants so affected suites are closed off.
Record the damage and the water source for the insurer.
Commercial Water Damage: the trade facts
Hanahan has a light industrial warehouse section along with shopping at Tanner Station and Bowen Square. In those buildings a loss costs more than the repair. Closed doors, lost stock and idle staff add up, so the plan is to dry fast and keep unaffected areas open.
One suite or room costs $3,000 to $9,000. Several suites run $9,000 to $25,000, and a whole building or a Category 3 loss runs $22,000 to $50,000. Size, after-hours work and contamination set the total.
$3,000 to $9,000
$9,000 to $25,000
$22,000 to $50,000
Ranges are typical figures, not a quote. The category of water, the square footage, the material class and how fast drying started move the number most. The water damage cost calculator gives a closer range.
The tech who does the walkthrough finds the source and maps the moisture before equipment goes down, and the drying team keeps it running until the readings say dry.
The crew stops the spread, contains wet areas and extracts standing water.
Wet carpet tile, ceiling panels and drywall that cannot dry are taken out.
Equipment is set in phases, with after-hours visits where needed.
Readings, photos and logs go to the manager and the insurer.
A big space is not dried all at once. The crew starts with the worst area, moves equipment as readings improve and releases rooms back to the business one by one. Phasing means a tenant can often return to part of the space before the whole job is done.
Supply and sprinkler water is usually clean, while overflowing restroom drains and floodwater from outside are not. Contaminated water means containment, protective gear and antimicrobial treatment before drying starts, and affected porous material is removed instead of dried.
Standing water in a building starts with water extraction, wet walls and floors need structural drying, and the Hanahan hub lists other services.
Commercial calls cover ZIP 29410, including the shopping at Tanner Station and Bowen Square, the light industrial warehouse section, Henry Brown Boulevard, Tanner Ford Boulevard and Foster Creek Road.
The same service nearby: commercial water damage in Goose Creek, North Charleston, Charleston.
Often, in part. Containment seals off wet areas so open suites keep operating, though that depends on the loss.
Yes. Extraction and equipment setup can be scheduled around business hours to limit lost trading time.
Either one can start the job. Lease terms and the insurer decide who pays, so the crew keeps full records.
Moving inventory and files out of the wet area is the first priority. Wet paper and electronics need quick attention.
The methods are similar, though spaces are bigger and flooring, ceilings and wall systems vary. Phasing and documentation matter more.
Property policies often cover sudden water losses, and some add coverage for lost income. Records from the crew help the claim.
Business flooded? Commercial dispatch runs 24/7.
Standing water in a shop, office or warehouse costs every hour it sits. The commercial crew extracts, contains and dries in phases.